"Sri Sai", NH 66, Kinnimulky Service Road, Udupi - 576 101 Karnataka, India.
  +91 91642 88700  +91 98455 54083  info@durotop.in


DUROPLAST CB-200

Water Reducing Plasticizer

20 litres, 50 litres, 220 litres
APPLICATION BENIFITS DOSAGE
Most suitable for all cement hollow/ solid blocks, paver blocks/tiles and pre-cast concrete, etc. Increases workability, compressive strength, reduction in breakages, saving in cement. 200 ml for 50 kg bag of cement.
DUROPLAST CB-200N

Water Reducing Plasticizer

20 litres, 50 litres, 220 litres
Most suitable for all cement hollow/ solid blocks, paver blocks/tiles and pre-cast concrete, etc. Increases workability, compressive strength, reduction in breakages, saving in cement. 200 ml for 50 kg bag of cement.
DUROPLAST FS-200

Accelerating and Water Reducing Plasticizer

25 kg, 60 kg, 240 kg
Ideal for all cement hollow/solid blocks, pipes, paver blocks/tiles and pre-cast concrete, etc. High early and ultimate strength, reduces w/c ratio, accelerates initial setting time, earlier shifting time of blocks. 200 gm - 1.5 kg for 50 kg bag of cement depending on required rate of acceleration.
DUROPLAST-FS 300

Accelerating and Water Reducing Plasticizer

20 kg, 60 kg, 240 kg
Ideal for all cement hollow/solid blocks, pipes, paving blocks/tiles and pre-cast concrete, etc. High early and ultimate strength, reduces w/c ratio, accelerates initial setting time, earlier shifting time of blocks. 200 gm - 1.5 kg for 50 kg bag of cement depending on required rate of acceleration.
DUROPLAST–H200

High Range Water Reducing, Rapid Hardening Paver Block Admixture

25 kg, 60 kg, 240 kg
Floor slabs, pre-stressed concrete girders. paver blocks, beams and columns specially suited for tiles manufacturing. Improved concrete density and surface finish, good workability, faster demoulding, high durability concrete. 200 - 600 ml per 50 kg bag of cement.
DUROPLAST–H200L

High range water reducing, rapid hardening paver block admixture.

25 kg, 60 kg, 240 kg
Floor slabs, pre-stressed concrete girders, paver blocks, beams and columns specially suited for tiles manufacturing. Improved concrete density and surface finish, good workability, faster demoulding, high durability concrete. 200 - 600 ml per 50 kg bag of cement.
DUROPLAST–H200TP

High range water reducing, rapid hardening paver block admixture.

25 kg, 60 kg, 240 kg
Floor slabs, pre-stressed concrete girders, paver blocks, beams and columns specially suited for tiles manufacturing. Improved concrete density and surface finish, good workability, faster demoulding, high durability concrete. 100ml – 400ml per 50kg bag of cement.
DUROPLAST–HD

High range water reducing, rapid hardening paver block admixture.

25 kg, 60 kg, 240 kg
Floor slabs, pre-stressed concrete girders, paver blocks, beams and columns specially suited for tiles manufacturing. Improved concrete density and surface finish, good workability, faster demoulding, high durability concrete. 150ml – 400ml per 50kg bag of cement.
DUROPLAST–SMF200

Rapid Setting, Curing and High Range Water Reducing Admixture for Precast Blocks, Tiles

25 kg, 60 kg, 240 kg
For manufacturing concrete blocks like hollow blocks, solid blocks, paving blocks, etc. in very low cement content, very harsh mixes. It can be used in semi dry mixes. Imparts excellent finish, improves strength, cement saver, low density and more yield. Reduces green stage breakages. 200 - 400 ml per 50 kg bag of cement.
DUROLAC ORGANO

Solvent Base Protective Coating

20 litres, 50 litres, 220 litres
Protective coating over natural stone, concrete paving tiles, fair faced masonary and stuccos. Used as protective coating for concrete walls, flooring and facades. It gives glossy finish, transparent and waterproof. Must be applied over dry surface. Can be applied by brush, sprayer and soft sponge. 200 - 250 ml/sq.mt. depending upon surface condition.
DUROLAC-WB

Water Base Protective Coating

20 litres, 50 litres, 220 litres
As protective coating over natural stone, concrete paving tiles, brick walls, concrete walls and flooring, etc. Easy to apply, gives glossy finish, transparent, waterproof. Can be applied over wet surface. 4 - 6 sq.mt./litre for two coats.
DUROLAC-WB29

Water base protective sealer coating.

20 liters, 50 liters and 220 liters
As protective sealer primer over natural stone, concrete paving tiles/blocks, brick walls, concrete walls and flooring etc. Easy to apply, gives glossy finish, transparent and waterproof. Can be applied over damp surface. 4-6 sq.mtr/liter for two coats depending on surface condition.
DUROLAC-CLR

Water Base Coloured Protective Coating for Paver Blocks/Tiles

5 kg, 12 kg, 25 kg
As protective coating over precast concrete blocks, paving tiles and blocks with different colours. Easy to apply, gives glossy finish, water can be added, can be applied on wet surface, available in variety of colours. 4 - 6 sq.mt./litre for two coats depending on surface texture.
DUROLAC-TRP

Solvent base coloured protective coating for Paver Blocks / Tiles.

4 litres, 20 litres
As protective coating over precast paving tiles/ blocks, cement tiles and concrete surfaces with different coloures. Easy to apply, gives glossy hard elastic and esthetic surface, UV stable and durable. 70-80 sq.mtr/liter per coat depending on surface condition.
DUROX

Iron Oxide Red, Yellow, Black, Brown, Green, Blue Colours

5 kg, 10 kg, 20 kg, 25 kg
Mainly used in construction industry. Pre-fabricated concrete parts, architectural products, paving blocks/tiles and colourful cement material. Inorganic pigment, very good light fastness, good weather durable property, good alkali and solvent resistant. And also non-toxic pigment. Depends on site condition.